Enphase Relay Q (single-phase)

€98.73

Tax included

Reference: RELAIS-Q-mono

EAN13: 0712971139992

In Enphase installations, the single-phase Q relay (decoupling protection) acts as a physical grid disconnection device for single-phase installations.

Comments (0)

No customer reviews for the moment.

Enphase Relay Q (single-phase)

Enphase Relais Q (monophasé)

In Enphase installations, the single-phase Q relay (decoupling protection) acts as a physical grid disconnection device for single-phase installations.
In the event ofspecific grid faults, the Q relay disconnects Enphase microinverters from the AC grid. When voltages and/or frequencies return to acceptable ranges, the Q relay reconnects the system.
The Q relay works in conjunction with the Envoy-S, and ensures that both neutral and phase conductors are disconnected according to grid requirements.

Easy to install

Lightweight and simple
DIN rail mounting for rapid installation

Reliable

Reliable load control
Automatic reset on return to normal network conditions

Intelligent

Management of voltage and frequency dips
Can be updated remotely
Easy-to-understand LED display

Technical specifications

SPÉCIFICATIONS Q-RELAY-1P-INT	Coupling Protection - Single-phase network (50 Hz)
Overvoltage category	III
Pollution degree	2
AC voltage operating range	from 85 to 270 Vrms
Nominal input voltage (Vnom)	230 / 240 Vrms
Nominal frequency	50 Hz
Frequency and voltage acquisition time under normal operation	100 ms
Number of protected voltage inputs	1
Number of IQ 7 microinverters per phase	Up to 19 Enphase IQ 7 Microinverters or 16 Enphase IQ 7+
Number of Q Relays per system	Up to four active Q relays per system
Type of electrical output	Double-pole normally open contactor (L1 and N)
Output power	4.8kVA
Type of electrical output	230 to 240 Vrms, 20A
Standby power consumption	10 VA
LEDs	Two LEDs red/green: one for max/min U tripping and another for max/min frequency tripping
Mounting	35 mm DIN rail (standard)
Width	53 mm
Overvoltage - L1 N output	Combination (1kV 2Ω)
Operating temperature range	-40 °C to 50 °C
IP protection rating	IP 20 (To be used in a protected environment)
Humidity	0% to 95% non-condensing
Compliance	IEC 61010
EMC Compliance	IEC 61326-1, BS EN 61000-3-2, BS EN 61000-3-3, BS EN 50065-1, BS EN 50065-2-2
Warranty	5 years

Reference RELAIS-Q-mono

Specific References

upc: 712971139992
ean13: 0712971139992

Condition New