Enphase Relay Q (3-phase)

€250.63

Tax included

Reference: Q-RELAY-3P-INT

EAN13: 0712971131248

In Enphase IQ installations, the multiphase Q relay functions as a network monitoring and disconnection device.

Comments (0)

No customer reviews for the moment.

Enphase Relay Q (multiphase)

Enphase Relais Q (multiphasé)

In Enphase IQ installations, the multiphase Q Relay functions as a grid monitoring and disconnecting device.
The Q Relay physically isolates IQ series microinverters from the grid when anomalies are detected or in accordance with grid regulations, and automatically reconnects when valid grid conditions are restored.
The Tetrapolar Q Relay isolates all phase and neutral conductors, and works in conjunction with the Envoy-S gateway.

Easy to install

Lightweight and simple
DIN rail mounting for rapid installation

Reliable

Reliable load control
Automatic reset on return to normal network conditions

Intelligent

Can be configured to monitor 1, 2 or 3 phases
Can be updated remotely
Easy-to-understand LED display

Technical data

SPECIFICATIONS Q-RELAY-3P-INT

Four-pole decoupling protection (50Hz) with DC injection detection

Overvoltage category (EN 61010-1)

III

CAT III

GRID terminal is rated for measurement category III.

ollution degree (EN 61010-1)

AC voltage operating range

from 85 to 265 Veff

Nominal input voltage (Vnom)

230 / 240 Veff

Nominal frequency

50 Hz

for frequency and voltage values during operation

Acquisition time
frequency and voltage values in normal operation	100 ms (5 line cycles @ 50Hz)

Number of protected voltage inputs

Up to 3

Number of microIQ 7 microinverters per phase

Up to 19 Enphase IQ 7 microinverters or 16 Enphase IQ 7+ microinverters

Number of Q relays per system

Limited to 20 active Q relays per system

Type of electrical output

Normally open tetrapolar relay (L1,

L2, L3 and N)

Output power

kVA per phase

Electrical output type

230 / 240 Veff, 25A

No-load power consumption

18 VA

LEDs	Four red/green LEDs: three for overvoltage and undervoltage trips,
one for frequency tripping (min f/ max f) and DC injection

)

Mounting

35 mm DIN rail rail (standard

Width

107 mm

Overvoltage -
L1 N output	Combination (1kV 2Ω)

-40

Operating temperature range

°C to 50 °C

Protection class IP

IP 20 (For use in a protected environment)

Humidity

to 95 non-condensing

Conformity	IEC 61010,
EN 61010-1

EMCI conformity

IEC 61326, BS EN 50065-1 &

2-2, BS EN 61326-1&2, BS EN 61000-3-11&12

Warranty

years

Reference Q-RELAY-3P-INT

Specific References

upc: 712971131248
ean13: 0712971131248

Condition New